Stans No Tubes Tubeless Conversion Kit If you have tubeless tyres or you're thinking about upgrading soon, you must check out the range of tubeless products from Stans No Tubes. With products designed to work with UST setups, standard tyres or standard rims, No Tubes is the most effective way to reduce rotational weight and gain the performance that tubeless tyres bring to your bike. The tubeless conversion kit is designed to convert standard MTB rims and tyres into a tubeless system. It is also able to be used on a rim that is already tubeless (Mavic XM819 or Shimano XT wheels) in order to setup standard tyres tubeless. Utilising rubber rim strips that fit around your rim to create an airtight bead, simply fit your standard tyres and add the required amount of latex sealant to provide a sealed and puncture-resistant tyre. Each kit is designed to convert one wheelset (two wheels) with enough sealant to seal up to 8 tyres.
From Stans No Tubes:
Why use our rim strip on tubeless rims? Without our rim strips, mounting a standard tire on a tubeless rim creates a poor interface, making it easier to burp air. Using our molded rim strips in tubeless rims creates a much stronger interface with the tire and rim. The interfacing is so strong there is no air loss even when a C-clamp has the tire totally compressed. The side walls are touching and the bead lock is completely exposed! Try this with your tubeless system! Sealant Benefits: No need to worry about the dreaded pinch flat and possibly never have another puncture flat again. Have the ability to use lightweight tires and not be limited to buying expensive and much heavier tubeless specific tires. Seals punctures and slows leaks that occur in most tubeless tires. As a result, your tubeless tires will hold air for longer periods of time. Lasts from three weeks up to three months. At that time you simply add more. (Time will vary due to different tire characteristics). Once you seal your tires they will not lose air pressure. What happens if I get a flat on the trail? The sealant does not use any glue or adhesive, so you can change a flat the same way you do now. Technical Information: You can lose anywhere from 100 grams up to 400 grams of rotating weight per wheel set. This System does not require any modifications to your existing wheel set. If you are not satisfied with it, all you do is remove the rim strip, and put your old heavy tube back in and go riding. This System requires very little mechanical ability to install.
The Stan's No Tubes Tubeless Conversion Kit Features:
Ok